191St-Henri
Member
Hi, i'm having a lot of problem with a machine that uses a SLC 5/04 as main plc (no problem there) and an other plc as motion controler. The second one is a PIC900 from Giddings & Lewis (down a lot) that controls a dozen of indramat HDS03.2 drives. I want that G&L out and replace the SLC 5 with a control logix.
Only problem, i'm not sure that the new AB could use the indramat drives.
I also heard that there is a serco card that converts so i can use it with my SLC 5 to control my drives but i doubt it.
Thanks for you answers and/or suggestions.
Only problem, i'm not sure that the new AB could use the indramat drives.
I also heard that there is a serco card that converts so i can use it with my SLC 5 to control my drives but i doubt it.
Thanks for you answers and/or suggestions.