ShaunCroman
Member
Hi- just wondering if anyone has had any dealings with the Alstom Courier protocol. I am looking at a legacy project which has a variety of equipment using K-bus (all Alstom/GE relays) connected to a KITZ201 module. The KITZ module is connected to a serial to Ethernet converter with its serial port set at 9600,8,2,n. I have tried getting this to work but no luck.. Citect has a driver for it but I suspect that the issue may not be with the OPC server- if anyone could give me any pointers on how to validate that there is data reaching the serial server it would be much appreciated
regards
Shaun
regards
Shaun