Good morning Guys,
PLC: micrologic 1500 LRP 24bwa c series
soft: Rslogix 500
We are required to consider the weight of the product in such a way that, when a particular weight is reached, the plc should stop the process.
For that, we are planning to use loadcell, but the output is analog.
I didn't have any analog modules with my plc (7 digital inputs and outputs modules right now).
In the documentation, it says that max of 8 i/o modules can be added with the base.
1. Which analog module should I use?
2. Do I need to configure it manually or just by clicking "read I/O config"
after installing ?
3. Any other suggestions to use analog inputs without purchasing an analog
module for the load cell?
4. I saw a power distribution issue in the documents, Does that cause any
problem if I install the module in the 8th position?
slot no module
1 1769 sdn
2 1769 sdn
3 1769 iq16
4 1769 iq16
5 1769 iq16
6 1769 iq6x (6 i/p , 4 o/p )
7 1769 ob16
8 vacant
cheers.
PLC: micrologic 1500 LRP 24bwa c series
soft: Rslogix 500
We are required to consider the weight of the product in such a way that, when a particular weight is reached, the plc should stop the process.
For that, we are planning to use loadcell, but the output is analog.
I didn't have any analog modules with my plc (7 digital inputs and outputs modules right now).
In the documentation, it says that max of 8 i/o modules can be added with the base.
1. Which analog module should I use?
2. Do I need to configure it manually or just by clicking "read I/O config"
after installing ?
3. Any other suggestions to use analog inputs without purchasing an analog
module for the load cell?
4. I saw a power distribution issue in the documents, Does that cause any
problem if I install the module in the 8th position?
slot no module
1 1769 sdn
2 1769 sdn
3 1769 iq16
4 1769 iq16
5 1769 iq16
6 1769 iq6x (6 i/p , 4 o/p )
7 1769 ob16
8 vacant
cheers.