defcon.klaxon
Lifetime Supporting Member
Hey guys, I'm reading through some existing ladder logic and the original programmer has used the abbreviation "CPT", seemingly to describe a control panel. There are two PLCs in this project, one in the Filter Plant and one in a CL2 Room which is a remote site. If there's a power failure in the CL2 Room, the alarm is described as "CL2 BLDG CPT PWR FAIL". Similarly in the Filter Plant, a power failure is described as "FILTER BLDG CPT PWR FAIL". Elsewhere the same alarms are described as simply a "CPT FAIL" with "PWR" being omitted.
In the end the CPT abbreviation is probably inconsequential but I want to make sure I'm not missing something. Any chance someone might know what that stands for? CP would easily be control panel, but what could that T stand for?
In the end the CPT abbreviation is probably inconsequential but I want to make sure I'm not missing something. Any chance someone might know what that stands for? CP would easily be control panel, but what could that T stand for?