ArmorView Plus 7 Grounding

Bbarnett

Member
B
Join Date
Jul 2013
Location
United States
Posts
77
What is the best practice to ground an ArmorView Plus 7?

The grounding terminal is on the outside.. Something I've never seen before. Usually it is just internal to the power cable. Am I supposed to run a separate ground wire to it? I don't think I've ever seen a single conductor outside of a cabinet before but I can't find anywhere in the NFPA79 that it is not allowed.

Ground.png
 

Similar Topics

E
Finder Type 39.30 MasterPLUS SSR Relay Interface Module Opinions
Hey guys, I just wanted to see if any of the bright minds on here had any opinions on these relay interface modules. Particularly, I would love to...
Replies
1
Views
55
BryanG
B
S
Panelview Plus 7 Std Series D - Screen Navigation Issues
I'm at a loss here and hoping someone else has seen this: Background: We've got two identical machines on our floor (we'll call them machine A &...
Replies
0
Views
68
Super Steve
S
D
I buy surplus PLCs, automation controls, industrial and MRO.
What's the best way to connect with more suppliers?
Replies
0
Views
86
Devlin
D
D
Help with TCSEGDB23F24FA M340 Modbus Plus Proxy Module
Hi Everyone, i was hoping for a little help with this module. i have data that needs to be read from a different plc through the Modbus plus...
Replies
11
Views
268
davexr
D
J
Connecting a Micrologix 1500 to a PanelView Plus 7
I have been working on this for a while now and I can't seem to get it. I was finally able to view the 1500 on the PanelView under the serial...
Replies
1
Views
119
jscampbell210
J
Back
Top Bottom