Avoiding pid blocks for contrologix 5000

however i would still be needing help on simple techniqes to get this rolling
Click to expand...
the following would be very helpful ...

(1) a complete list of the hardware you have on order ...

(2) a list of digital I/O signals (24 VDC, etc.) ...

(3) a list of analog I/O signals (4 to 20 mA, etc.) ...

(4) a list of communications signals (Ethernet, etc.) ...

without this type of detailed information, all we can do is speculate ... you need nuts-and-bolts information in order to start nailing things down ...
 

Similar Topics

spaceacealpha
Avoiding EIP Belly Flop
Can anyone confirm my thinking here. I'm designing a new system using EIP as the communication and never done this before. The plan is this...
Replies
2
Views
2,366
Ken Roach
Ken Roach
MASEngr
RFH -> Cooling -> avoiding fire and failure
I have a new PLC system that requires a fair bit of cooling. All the components dissipate 170W, worst case. (one hundred seventy watts) There's a...
Replies
3
Views
2,794
rdrast
rdrast
R
Avoiding A-B Networking Headaches
I'm about to connect separate systems together on a DH-485 network. Each system has a Micrologix 1500 PLC connected with a PanelView touch screen...
Replies
1
Views
2,351
jdbrandt
J
J
cheap dual pump water booster simulation build parts PLC VFD PID
Hi, I would like to assemble a simulator/practice booster pump system that uses PID to maintain steady water pressure under various outlet demands...
Replies
0
Views
82
JoeM61
J
C
Limit HP from Torque AI and RPM PID Output
Hello, I have a motor that we are sending a RPM Speed Output from 0-100% to the VFD. However, the Motor HP needs to be limited to 6000 HP and the...
Replies
3
Views
91
Rob...
R
Back
Top Bottom