Hi, I have a problem with machine that uses B&R CP260. I have PLC program on PC but I cant find PG2000 program anywhere on net. Please can some one send it to me. I tried open the program in AS 2.7 but it gives me invalid project file error kristijan.klapac @ gmail.com
B&r pg2000
- Thread starter Max4507
- Start date
bits'bytes
Member
Hi
are you still in need for the PG2000 Software?
Are you sure it is a PG2000 project (project folder ends in .PGP ?)
Regards
Manfred
are you still in need for the PG2000 Software?
Are you sure it is a PG2000 project (project folder ends in .PGP ?)
Regards
Manfred
Similar Topics
Took an 8 hour butt whipping today, cpu either went to stop mode or went to run mode with no outputs operational after the first 8 bits, Ended up...
i have a problem with a program loaded with an eprom that i believe is not correct. the machine beside it has an identical program and i can...
---B&R 2003 CP474 CP221---
Programmed with PG2000 and I have the source code.
I am new to the B&R brand. I have 3 blow molders each running the...
Hello,
I need to support B&R System 2003 and 2005 control systems which were programmed using B&R PG2000 software running in DOS environment. My...
Hi guys,
I am using a PG2000 to view the PLC file (S5D) but I have a simple problem I can't see the program in LAD mode and it shows me just STL...