backtransfer data from simatic panel
- Thread starter amrhadad
- Start date
It is only possible if the project was transferred to the panel with the "enable backtransfer" option ("enable upload" in Protool).
And, there must be a flash-card in the panel.
And, if the program was made with Protool, then I am not sure that the upload can be done with WinCC Flexible.
And, there must be a flash-card in the panel.
And, if the program was made with Protool, then I am not sure that the upload can be done with WinCC Flexible.
Similar Topics
Hi,
At one of my sites contractors have failed to supply a backup of our TP1200 Comfort HMI.
I was going to try and carryout a backtransfer in...
Hello everyone,
I've a MP277 Key (8 inches), and I want to backtransfer the program that is running on it to my PC using WinCC Flex 2008, for...
Hello,
Is it possible to upload a project from a TP170A panel to a PC? The "backtransfer" option is not active for this panel in the WinCC Flex...
Hello everybody,
I'm currently working on a project where I need to implement an IoT platform based on Microsoft Azure Cloud. Communication is...
Hello.
I have a db which is 1000 INT, and this db is represented in WinCC as a raw data type set of 5x 400 Bytes.
This set is read with a script...