Basic Citect and DH485 setup

Jayden

Member
J
Join Date
Dec 2007
Location
camperdown
Posts
41
Hi all. I am hoping to setup a very cheap citect computer for a customer. Im currently looking at slotting a PKTX card into a PC to communicate with the DH484 network. On the network is a SLC5/04 and Micrologix 1200 via a NET AIC+ on each device. There are also some panelviews connected directly to DH485. Does Citect support this setup and if so what driver do i need to use? Also is this the cheapest way out? I only have Rslinx Lite therefore cant use the rslinx driver.
 

Similar Topics

afm
Basic Sensor Integration Question
Hi all, I have a noob question regarding data handling from sensors. I understand configurations and I/O mapping sensor input/output variables...
Replies
2
Views
227
afm
afm
E
Check my basic program?
Hello I am new here and new to PLC's, I wrote this program for a class that I am taking and my local tech school. The description is switch 7 will...
Replies
0
Views
422
epdiesel
E
E
Check my basic program?
Hello I am new here and new to PLC's, I wrote this program for a class that I am taking and my local tech school. The description is switch 7 will...
Replies
10
Views
1,994
drbitboy
drbitboy
Mas01
Siemens TIA v18: WinCC Basic: HMI displaying PASS/FAIL status...
I’m a bit stuck on HMI (KTP-1200) programming… See the picture attached. The PASS or FAIL box should only appear when the toggle switch is...
Replies
7
Views
1,091
mk42
M
C
Modicon M221 Machine Expert Basic Write Var
Hey Programmers, Heres todays puzzle I was trying to solve... I have a Modbus TCP network with two Modicon M221 controllers live on my work bench...
Replies
0
Views
482
ControlSystems
C
Back
Top Bottom