Beckhoff CX-8090 network identification

koutnej

Member
K
Join Date
Jun 2016
Location
Brno
Posts
1
Hello,

I have CX8090 from Beckhoff. It has two network cards (Ethernet, RT-Ethernet), one card is with two ports - X101 and X102 (switched).

What I need is: If I connect another CX8090 to the first to port X101, can I in program identify some ID or name of second connected CX?

Thank you,
Petr.
 

Similar Topics

I
Beckhoff CX8090 + Weintek EMT3070a
Hi to everybody. I'm beginner on Beckhoff so I'm having issues with connecting Beckhoff CX8090 and Weintek EMT3070a. I'm trying to use Beckhoff...
Replies
2
Views
1,740
ividic
I
K
Beckhoff CX8090 ERR LED and X101-102 ports not working
Hello there, I have a problem with the cx8090. When I insert the plug to wall, the err led lights up steadily and does not go out. I copy to sd...
Replies
2
Views
2,782
Mad_Poet
M
S
Beckhoff CX8090 and 3d-party devices
Good afternoon! I have problem with connection 3d-party device to beckhoff CX8090. The device is Festo CTEU-EC module(EtherCat). After auto scan...
Replies
6
Views
3,920
RocketTester
R
K
Beckhoff plc cx8090 Program
Hello folks! Long time lurker here, my first post so be gentle.. We recently replaced a beckhoff cx8090 controller.. and i was asked if i could...
Replies
8
Views
2,971
Archie
A
G
Beckhoff EL5151 and EL5101 64bit timestamp to CX8090
I am going to attempt to use a EL5151 and EL5101 to read a torque flange (freq output) and encoder. I need to be able to do calculations that...
Replies
4
Views
1,627
g.mccormick
G
Back
Top Bottom