Beijer E-300 Firmware Upgrade Help !

[gauravjc]

I have a beijer e-300 HMI , I also have the latest 6.10 firmware bin file , please help me how to upload the .bin file to the e300 and wht is the software i require to upload and where can i download this software.

Your kind help is appreciated !


Thank you !

 

[supporter]

Hi,

To be able to download a new firmware you will need to use HMI Tools System Loader. This software is free of charge, you can download it from e.g Beijer's website:
http://www.beijer.se/web/BExFilePileAUT.nsf/0/1DD4F07ABE70B6E5C125728E005ADB78/$FILE/HMIT600.zip

 

[gauravjc]

dear supporter,

thanks for your reply ! Pls also let me know is there any special cable to use with or the normal programming cable would do ?

& does firmward upgrade hard the system hardware ?

Thanking you again !

 

[krinatech]

Hi,
There is no special cable.
It's done with programming cable.
If possible then send me the 6.10 firmware.
And i have also one problem.I have e-300 hmi & the program can not download completely.
And error is disply that : 1..FS_GetNewObjLink out of memory
2..Username or password is wrong
3.. No PLC port
I have just download 6.03 firmware but still there is error..
If anyone know then reply me.