BTR abd BTW Instructions

sweety616

Member
S
Join Date
Jul 2005
Location
New Jersey
Posts
36
I read through the descriptions of BTR and BTW instructions but I am unable to catch the physical significance of the same. Could anyone please provide me with a sample ladder logic using these instructions and explain me what they are doing?

Thanks
Sweety
 

Similar Topics

B
BTR instruction max block length
Hello all, I see that the Block Transfer Read instruction can read a max length of 64 words I have a Hilscher gateway to map DeviceNet Slave to...
Replies
7
Views
854
BeepBob
B
S
1747-sn btw/btr 1747-asb
I have been asked to add new hardware to an old system. The PLC is a 5/04 SLC. In local rack, slot 25, is a 1747-SN connected to a 1747-ASB in a...
Replies
4
Views
2,512
Strugglin_On
S
K
AB PLC5 BTW/BTR Block
Dear Pros, Need help on converting PLC5 to Studio 5000.:bow: I found few BTW/BTR block pointing back to Rack 000, group 0, module 0, which should...
Replies
8
Views
2,244
koyeap
K
B
PLC 5/10 1771 BTR Devicenet status bit
Hello, I am trying to create a network status map at a plant. I'm assuming the comm status bit of dnet nodes is in the BTR/BTW instruction that...
Replies
0
Views
985
bigLee
B
L
BTR instruction and a micromotion flow meter
Hello, I have a quick question hoping to get some clarity. I am working with a RSlogix 5 program where a PLC5 processor is communicating via...
Replies
3
Views
2,641
Ron Beaufort
Ron Beaufort
Back
Top Bottom