CAN-bus Keypads

Karsten

Member
K
Join Date
Feb 2006
Location
Odense
Posts
158
Hello,

I am looking for a Keypad that can be attached to a CAN bus so I do not had to wire buttons to an input module. It is for a mobile aplication so it needs to be IP66, stand vibrations -25C to 50C etc. about 10 buttons preferably about 1*1"

Preferably CAN-OPEN but J1939 or layer 2 will do.

Found this:
http://www.grayhill.com/news/default.aspx?ArticleId=15

Seems good. Anyone have any experience?

Other suggestions??
 

Similar Topics

P
Modbus AOI Data transfer
Hello Everyone, I am using a raC_Opr_NetModbusTCPClient AOI module, as below,. So, I need some assistance to restrict in reducing the poling...
Replies
2
Views
107
parithielam15
P
R
Issue with mitsubushi melsec PLC modbus QJ71MT91
I want to communicate my Q series PLC with Factory IO using GX works 2 software, I want to use modbus as server and the ips are as follows plc...
Replies
0
Views
74
raheelredben
R
F
Modbus TCP communication
Hi folks, I have a Controllogix in communication with a zigbee coordinator using Logix AIO for modbus tcp. This zigbee coordinator have 3 slaves...
Replies
10
Views
338
Contr_Conn
Contr_Conn
R
Modbus Master Siemens S7-300 - OB35?
Hi, I'm setting up a modbus master on an S7-300. It seems to work in OB1 but not when I use it in OB35. Does anyone have any ideas why? Could...
Replies
10
Views
121
Lare
L
tlf30
Cheap Foundation Fieldbus USB communicator?
Anyone know of a cheap foundation fieldbus communicator? Something like the USB 8486 H1, but one that does not cost $3k? Thanks, Trevor EDIT: I...
Replies
3
Views
162
AlfredoQuintero
A
Back
Top Bottom