CC-Link I/O addresses?

cidchase

Member
C
Join Date
May 2018
Location
Memphis
Posts
111
Trying to find the proper documentation to explain the CC-Link Parameters for Mitsubishi remote I/O. The system I am modifying uses several AJ65SBTB1, and it looks like to me that the existing configuration leaves a lot of I/O unavailable. Processor is a Q06HCPU. I just want to understand the automatic I/O allocation. I've done a little searching online but have not hit on the right manual yet. o_O Hoping someone has a better idea...
 

Similar Topics

C
Mitsubishi R08SFCPU and RD78G8 communication to FR-E800SCE (Safety Version) on CC-link IE TSN
I'm struggling to get an FR-E800SCE to work on CC-Link IE TSN. I'm sure the issue is with the drive, when I plug in the network cable I get no...
Replies
1
Views
105
cottagewood
C
I
Rockwell and LR-TB Keyence Io Link
Hi everybody, I would like to know if anybody here has already programmed with a LR-TB keyence on Io Link on a Rockwell PLC? And perhaps have...
Replies
0
Views
82
I_robot72
I
I
Io link Keyence LR-TB2000CL with studio 5000
Hi everybody, Is anybody here still have programmed a Keyence sensor LR-TB2000CL and used it as io link material in studio 5000. I would like to...
Replies
0
Views
94
I_robot72
I
D
IO link compatibility
Hey there friends, recently discovered the world of industrial automation and learned what this fancy PLC can do so i am a super novice. Started...
Replies
10
Views
341
durallymax
D
P
Mircologix 1400 ModBus RTU Link Layer Error
Hi, I'm having an issue with a mircologix not transmitting out. The current setup is a mircologix 1400 connected to a Guardian 100 Radio...
Replies
1
Views
114
drbitboy
drbitboy
Back
Top Bottom