TheBigHarv
Member
Hey guys,
I am using an A2USHCPU-S1 PLC and am trying to set up a network between a A1SJ61BT11 CC-Link card and a AJ65BT-R2 RS232 card.
I have downloaded a sample program from Mitsubishi to the PLC but am not having any success with getting the R2 module to communicate with the CC-Link card. I am attempting to pass data from a SICK barcode scanner through the R2 to the CC-Link card. The errors we are recieving are "transmission error complete" and "reception error read complete" The initialization complete finishes without any errors on the CC link card but the errors are popping up on the R2 module. Line tests and hardware test have both came back as good, so I am lost as to where my problems could be.
Any help on this topic would be greatly, GREATLY appreciated, as we have been phoning Mitubishi's tech-support line for a week now without any help on the matter, only promised returned calls that have never been recieved.
Thanks.
TBH
I am using an A2USHCPU-S1 PLC and am trying to set up a network between a A1SJ61BT11 CC-Link card and a AJ65BT-R2 RS232 card.
I have downloaded a sample program from Mitsubishi to the PLC but am not having any success with getting the R2 module to communicate with the CC-Link card. I am attempting to pass data from a SICK barcode scanner through the R2 to the CC-Link card. The errors we are recieving are "transmission error complete" and "reception error read complete" The initialization complete finishes without any errors on the CC link card but the errors are popping up on the R2 module. Line tests and hardware test have both came back as good, so I am lost as to where my problems could be.
Any help on this topic would be greatly, GREATLY appreciated, as we have been phoning Mitubishi's tech-support line for a week now without any help on the matter, only promised returned calls that have never been recieved.
Thanks.
TBH