Cermate GD17n HMI

[adrian_v]

Hi everyone. I´d like a little help on this HMI. I´d like to someone recommend me a programming software for this HMI. It seems to have at least 10 years old. In the website of Cermate doesn´t appear anymore.
Thanks. Best regards.

 

[kwade]

The software does not appear to be PAID SOFTWARE and does not appear to have any copy protections, so I feel confident that this post is not in violation of the forum rules.
Moderators: If my assessment is deemed to be incorrect, please remove this post.

WaybackMachine has an archived site of GD Shenzhen Cermate Technologies from circa 2004 (and several other archives.)
In the archive from 2004, there is :
GD17 PM (V1.2.00) (programming software)
GD17 manual English and Chinese
CE,FCC,BSMI documents are also there
The UR driver and driver manual are also there.

https://web.archive.org/web/20040603200757/http://www.cermate.com/Process?tag=udt_1_0

 

[adrian_v]

Thank you kwade. I´ll check your leads.