Cincinnai/DynaComp HMI

degreg

Member
D
Join Date
Jun 2005
Posts
1
Hi, I looking for development software to make some changes to a Cincinnati/DynaComp Inc. TouchView HMI. I believe Cincinnati/DynaComp was bought by Total Control, and Total Control has since been acquired by GE. The label on the back of the panel has the following information... Total Control, Model# 7100ST.
I need to add alarms and would like to use the Touchview.
Thanks,
Degreg
 

Similar Topics

V
Shihlin HMI
hi there, I'm a beginner pls help when transferring pc to hmi there's an error message on shihlin hmi written com1 station 1: communication...
Replies
1
Views
87
DarrylR
D
H
Mitsubishi FX3G PLC with Beijer HMI E615
Hello, I have a Mitsubishi FX3G 14M PLC and a E615 HMI from Mitsubishi/Beijer. I'm using GXWorks 2 to do the programming and I have no problem...
Replies
4
Views
158
NicoSz
N
B
Advantech TCP-1250H HMI upload/Download
Good people of PLCs.net, I am currently working with an HMI that is advantech 1250H, that communicates with a 1769 Compact logix and Currently...
Replies
2
Views
80
bdauliya
B
T
Is it bad to have multiple identical inputs on an HMI?
Hello all, I know its not good practice to have duplicate destructive bits when writing plc code, but I'm wondering about writing to the same tag...
Replies
2
Views
129
TheRooster
T
A
Trying to get copy of Red Lion G315 HMI program but support upload was not ticked.
Hi All, As a precaution my company has been collecting copies all the HMI and PLC programs. I have recorded copies of most of our sites...
Replies
0
Views
81
Angus_Fergusson
A
Back
Top Bottom