Comapct Logix L31 and Intouch Wonerware 9.5 communication on DASABCIP server

manasi

Member
M
Join Date
May 2007
Location
maharashtra
Posts
123
Dear All,

I am trying a communication setup between Intouch wonderware 9.5 and Compact logix L31 through 1761-NET-ENI (Ethernet interface module). is this communication is possible with DASABCIP server? If possible then how to configure it.

Regards
Manasi
 

Similar Topics

A
Siemens ET200s IM151-1 comapct
Good evning, Today i was going to add a new profibus nod to a system it´s a 6ES7151-1CA00-3BL0 Siemens ET200s IM151-1 comapct. The module have...
Replies
3
Views
2,233
ason
A
L
Beckhoff IPC and Controllogix PLC
I'm trying to integrate a Beckhoff IPC with a Controllogix PLC. There is some documentation, on the Beckhoff website, on how to do a PLC-PLC comms...
Replies
0
Views
54
lcabal27
L
A
Migrating Program from S7-300 to RSLogix500 & Migration from CompactLogix to RSLogix500
So basically i have 2 queries : 1. I have a program file of S7-300 PLC which i want to migrate in RSLogix500.In short i want to convert my simatic...
Replies
10
Views
82
Aijaz_Khan_01
A
andyvanosdol
Keyence SR-X300 to Micrologix 1400
Hey all, first time poster here. I am wondering if anyone has tried using a Keyence SR-X300 barcode scanner to a Micrologix 1400. Keyence sent...
Replies
0
Views
47
andyvanosdol
andyvanosdol
P
Communication Between Compact Logix and Guard Logix Error
Hello Everyone, I have a issue with communication between two different PLCs. So here is the facts, The Master PLC is Guard Logix 5069 with IP...
Replies
4
Views
98
Ken Roach
Ken Roach
Back
Top Bottom