Communication between ABB dcs and AB Compact logix.

[SATHEESH]

Please anyone could guide me.....
How to send and receive datas between ABB dcs and Compact logix (1769 L32E COMPACT LOGIX5332E controller) over Ethernet.
I 'm using (1769 sm2 module).
Thanks in advance...

 

[hooter32]

I had the same challenge. I needed to get data from our controllogix to our abb Dcs. You will need an opc server. I used kepware because it supports Allen Bradley. You will have to buy the AB suite license. Works like a charm.

 

[SATHEESH]

Thank you very much for your information Mr. Hooter

 

[Pudden]

If the ABB DCS uses Modbus TCP, you could use a gateway, Modbus TCP slave to EtherNet/IP adapter, such as:
http://www.anybus.com/support/support.asp?PID=242&ProdType=Anybus X-gateway

//Patrick L

 

[SATHEESH]

Thanks a lot