communication between ace3600 and maple system OIT4185

[afialey]

i am very new to ace3600 and maple systems Oit4185 i've been trying to establish communication using Modbus protocol (via RS-232) and i always get an error from the OIT4185 "can't connect to PLC, retry in Progress" and on the ace3600 i get error #827 "first y-coordinate out of range" and also error #825 "Data type Mismatch". I tried everything i can think of but no success. Please help!!!

 

[bluenoser337]

I replied in the other post you made

 

[afialey]

I tried your reply but, it's still not working.
Any other suggestions!!!!!!

 

[bluenoser337]

Correct cable (100% for sure)?

 

[afialey]

yes. i have the correct cable.

 

[bluenoser337]

What are Maple Systems saying?

 

[afialey]

we tried all kind of possible addressing, no luck

 

[bluenoser337]

You'll have to try that Motorola e-mail contact. They should be able to tell you what is missing...but it may take a while to reach the right person. Keep us up-to-date.

 

[bluenoser337]

Did you ever have any success with this?