communication between plc & drive

Chidambar Kulkarni

Member
C
Join Date
Nov 2003
Location
Bangalore
Posts
2
i have a trouble in establishing communication with Yaskawa v7 AC drive to ABB 07KT51 plc through RS485 Modbus Protocol. I have selected proper settings of baudrate-19200, stop bit-1, parity-none, etc., and i have checked the plc port by modsim32 software it is working ok. but i am not able to communicate to the drive. once i tried with checking the port of drive through modscan32 software but was not successful.
 

Similar Topics

A
communication between two siemens plc's with different ip address
i have two plc 1. s7-1212dc/dc/dc ip; 192.168.0.1 2. s7-1500 1513-1pn ip; 192.168.3.2 i need to get data from plc1 to plc2. any idea how to do...
Replies
5
Views
135
mk42
M
Y
Communication between Delta plc DVP12SA2 and Arduino using MAX 485 module.
I'm trying to write a data in Arduino using MODWR function block .I used the code I got from online for both PLC and Arduino. I made the wiring...
Replies
4
Views
142
yawin
Y
A
Loss of communication between PLC and SEW frequency converter
Communication between devices will stop working for a certain period of time. I caught the error message using WireShark. I cannot identify the...
Replies
0
Views
110
AdamV
A
A
Communication between Matlab and Siemens PLC Using TCP
I am trying to establish communication between Siemens PLC 1500 and Matlab. I followed a tutorial on youtube at this link: But when I got to the...
Replies
0
Views
360
abiolatoks
A
I
TCP communication between PC <-> PLC
Hi all, I don't have experience PLC programming so it might be a stupid question. I made a socket request to PLC and there is no problem to read...
Replies
5
Views
880
Mark-
M
Back
Top Bottom