Communication Between Siemens Cp341 Modbus Master And More Than One Slave Setup

jtarasu

Member
J
Join Date
Jun 2008
Location
Bahrain
Posts
3
Hi Friends,

In my one of the Project Using Siemens CP341 ( Communication Processor).
I am facing problem for modbus communication between CP341 (Modbus Master) and more than one slaves.

I can communicate one slave also send / receive the feedback . How to communicate two slaves at the same time? Any setup is there for communicate more than one slave?

Anyone knows the setup or have any technote please let me know....

Thanks and Regards,

Arasu

 

Similar Topics

A
communication between two siemens plc's with different ip address
i have two plc 1. s7-1212dc/dc/dc ip; 192.168.0.1 2. s7-1500 1513-1pn ip; 192.168.3.2 i need to get data from plc1 to plc2. any idea how to do...
Replies
5
Views
116
mk42
M
A
Communication between Matlab and Siemens PLC Using TCP
I am trying to establish communication between Siemens PLC 1500 and Matlab. I followed a tutorial on youtube at this link: But when I got to the...
Replies
0
Views
354
abiolatoks
A
A
Communication between Siemens 1214 and Micrologix 1400
Hi there, I am trying to communicate between Siemens 1214 that I have and a Micrologix 1400 on the other end through CIP protocol. I downloaded...
Replies
4
Views
2,059
akky
A
A
how can i make communication between two plc ( scheneider and siemens )
i have TWO PLCS ( ONE PLC M258 SCHENEIDER ) AND OTHER PLC IS ( SIEMENS S7-300 CPU314C-2DP ) SOFTWARE USED FOR SIEMENS IS TIA PORTAL V13 AND...
Replies
3
Views
2,048
ZestyMozzarella
ZestyMozzarella
H
Communication between Siemens S7-300 and Vijeo Citect 7.2
hi how can i Communication between Siemens S7-300 and Vijeo Citect 7.2 with Ethernet tcp/ip ? please help me!🤞🏻🤞🏻
Replies
1
Views
1,805
sigmadelta
S
Back
Top Bottom