John Gaunt
Member
Hello Marie,
I use S7-400 and Citect communication via CP5613
using Profibus. CP5611 is very similar.
You need to use the S7ONLINE connection for Citect.
Basically everything must be correct or you get nothing
with S7NT communication.
I would try setting up as Profibus rather than MPI
probably because that is how I do it and I know it works.
If you can't get it working let me know. If you emailed me
your S7 archived project and your Citect project I should
be able to sort it out.
Regards.............John Gaunt
I use S7-400 and Citect communication via CP5613
using Profibus. CP5611 is very similar.
You need to use the S7ONLINE connection for Citect.
Basically everything must be correct or you get nothing
with S7NT communication.
I would try setting up as Profibus rather than MPI
probably because that is how I do it and I know it works.
If you can't get it working let me know. If you emailed me
your S7 archived project and your Citect project I should
be able to sort it out.
Regards.............John Gaunt