communication hangs up in ABB PLC

panthripu

Member
P
Join Date
Mar 2004
Posts
228
Hi
I hope someone can help me here. We have serial communication between siemens S7 400 and ABB AC450 using MVI card CI532v03. At times the communication hangs up. It is reset by ABB PLC using MDB MVI 1 and it gets OK. We are not able to know why it is creating this problem.It happens very rarely.
 

Similar Topics

C
SLC 5/03 Communication / Processor Issue
Hello All! I am writing today because I cannot figure this out for the life of me. Another site I am affiliated with keeps having their slc 5/03s...
Replies
10
Views
182
geniusintraining
geniusintraining
A
Communication Issues between PowerFlex 700 and M580 Controller
Hello, I am currently in the final week of my internship and I have encountered issues with communication between a PowerFlex 700 variable...
Replies
0
Views
56
asmer
A
dalporto
ProSoft MVI56E-MNETC Client Communication monitoring
Hi all. I have a Modbus ProSoft module in my setup with a capability of 30 clients (0-29), which I'm trying to monitor the Ethernet Connection...
Replies
0
Views
42
dalporto
dalporto
F
Modbus TCP communication
Hi folks, I have a Controllogix in communication with a zigbee coordinator using Logix AIO for modbus tcp. This zigbee coordinator have 3 slaves...
Replies
10
Views
317
Contr_Conn
Contr_Conn
T
TIA Portal 15.1. and fanuc SR-6iA Communication
Hello, i am using profibus as communication between plc and fanuc arm. I can easily send inputs from plc to arm, but i can't monitor any outputs...
Replies
0
Views
47
Tinx12
T
Back
Top Bottom