communication online CPUQ02

indra

Member
I
Join Date
Apr 2005
Location
indonesia
Posts
161
Hi,

Does, anyone knows HOW TO COMMUNICATION ONLINE between my notebook and MITSUBISHI PLC CPU Q02 ? because I tried many times always failed.
Is it the same way as communication with CPU Q3 series ?

indra
 
Is it a Q or Qnn, Q02A Q02H, you must set a project for the correct processor.
have you got a true com port, try different settings in the comms, try plc direct coupled setting to see if it will talk
 

Similar Topics

M
How to go online to a Mitsubishi Melsec F2-60MS-U Communication
Hello All, We have an old Mitsubishi Melsec F2-60MS-U controlling a cup conveyor and a heat seal heads. The conveyor was manufactured by Fords...
Replies
0
Views
2,009
mapizarro
M
Contr_Conn
AI2 software for PLC2 - online communication question
Need some help: I have a customer with a lot of old machines, most of them PLC2s. Working just fine, no question to offer replacement yet. I must...
Replies
7
Views
7,027
Seppo
S
dalporto
ProSoft MVI56E-MNETC Client Communication monitoring
Hi all. I have a Modbus ProSoft module in my setup with a capability of 30 clients (0-29), which I'm trying to monitor the Ethernet Connection...
Replies
0
Views
26
dalporto
dalporto
F
Modbus TCP communication
Hi folks, I have a Controllogix in communication with a zigbee coordinator using Logix AIO for modbus tcp. This zigbee coordinator have 3 slaves...
Replies
2
Views
100
Contr_Conn
Contr_Conn
T
TIA Portal 15.1. and fanuc SR-6iA Communication
Hello, i am using profibus as communication between plc and fanuc arm. I can easily send inputs from plc to arm, but i can't monitor any outputs...
Replies
0
Views
40
Tinx12
T
Back
Top Bottom