Communication With Non Siemens Plc
- Thread starter shabi
- Start date
Fritz_frederix
Member
Hi,
What you need is an CP343-1 or for an S7-400 an CP343-1 card.
What you need is an CP343-1 or for an S7-400 an CP343-1 card.
PeterW
Member
Fritz_frederix said:
Similar Topics
Hi all,
How to connect a FLOW transmitter which supports HART to a PLC which does not support HART ???📚
Details about products used:
PLC...
Hi,
I need to implement an acyclic communication with several Profibus PA slaves through a Siemens DP-PA Coupler. Master will probably be a...
Hi all.
I have a Modbus ProSoft module in my setup with a capability of 30 clients (0-29), which I'm trying to monitor the Ethernet Connection...
Hi folks,
I have a Controllogix in communication with a zigbee coordinator using Logix AIO for modbus tcp. This zigbee coordinator have 3 slaves...
Hello, i am using profibus as communication between plc and fanuc arm. I can easily send inputs from plc to arm, but i can't monitor any outputs...