bubbleship
Member
I'm using a Component C1000, with Micro 1400. When I go to config screen opn the PV to enter IP adress in the Static mode. The customer need to use the following adress 031.080.071.002 so I enter that address with mast 255.255.255.00. Whan I go back to the config screen to see the address....it show the IP address of 25.64.57.2.......... I don't understand whats going on. I re-enter it again and again it shows 25.64.57.2 So I put in are standard address 192.168.001.004 it will show that address in the config screen. I don't unerstand What I'm doing wrong!!!