ja_varela77
Member
Hi
I want perform the comunication (ethernet) between ML 1400 (IP: 192.168.1.11)and Red Lion HMI G304k200 (IP: 192.168.1.20).
I wrote the secuence in the PLC and two tag to test the cominucation, I want activate the B9:3/0 with the HMI and read the C5:3.ACC from PLC but I cant and I have 3 days trying.
I add programs of the PLC and HMI, please, check it and tell me that I am doing bad.
Thank very much for your support.
Best regards.
I want perform the comunication (ethernet) between ML 1400 (IP: 192.168.1.11)and Red Lion HMI G304k200 (IP: 192.168.1.20).
I wrote the secuence in the PLC and two tag to test the cominucation, I want activate the B9:3/0 with the HMI and read the C5:3.ACC from PLC but I cant and I have 3 days trying.
I add programs of the PLC and HMI, please, check it and tell me that I am doing bad.
Thank very much for your support.
Best regards.