TimothyMoulder
Member
Hello all,
I'm trying to replace an obsolete NT600 touchscreen with the aforementioned EA9-T10CL C-More HMI from Automation Direct, serial connection from the Host port on the PLC, all standard parameters (9600, 1,7,E,1).
Saw a couple posts where folks got it to work on other sites, but not getting anywhere right now. The HMI is "pinging" the PLC, as the serial lamp is flashing, but not fully connecting.
Has anyone tried to connect an Auto Direct HMI to a CPM2A? IF so, how did you get it to work (or did you? Failure is also an option).
Thanks,
Tim Moulder
I'm trying to replace an obsolete NT600 touchscreen with the aforementioned EA9-T10CL C-More HMI from Automation Direct, serial connection from the Host port on the PLC, all standard parameters (9600, 1,7,E,1).
Saw a couple posts where folks got it to work on other sites, but not getting anywhere right now. The HMI is "pinging" the PLC, as the serial lamp is flashing, but not fully connecting.
Has anyone tried to connect an Auto Direct HMI to a CPM2A? IF so, how did you get it to work (or did you? Failure is also an option).
Thanks,
Tim Moulder