Connecting Digi OneIAp to controllogix

[RogerWright]

Hi

I am trying to set up a serial to ethernet Digi One IAP so that data can be read in Studio 5000. issue I have is finally got RSLINX to accept the Digi but it is not visible in Studio 5000. how do I address the Digi


I am not a pro programmer but have done a bit mainly with SLC500


\help please

 

[sigmadelta]

I have done this before, but I don't have a device in front of me to connect to.

Basically, you should either use Ethernet/IP or Allen-Bradley Ethernet in RS Linx, and connect to the CPU via the IP address of the Digi One IAP. The Digi One IAP will appear as an CPU with Ethernet, and handles automatically the serial DF1 connection.

The best I can do is give you the manual from Digi, since I don't have a device:

https://www.digi.com/resources/documentation/digidocs/pdfs/90000636.pdf