Connecting Kinetix 5500 with Yaskawa Motor

gzPLC

Member
G
Join Date
Oct 2018
Location
Texas
Posts
39
Is it possible to connect a Yaskawa Motor with Kinetix 5500 drive?

Yaskawa motor Part type number: SGMSH-20DCA6C
 

Similar Topics

T
PLC Delta DVP 12SE and HMI Kinco GL043E not propperly connecting
Good Day to all of you, this is my first post, i will try to explain as best as possible, english is not my natural language. I am performing an...
Replies
0
Views
40
Tecnolaundry
T
J
Connecting a Micrologix 1500 to a PanelView Plus 7
I have been working on this for a while now and I can't seem to get it. I was finally able to view the 1500 on the PanelView under the serial...
Replies
1
Views
85
jscampbell210
J
K
Connecting FactoryTalk Datalog to MariaDB
Hello, I was looking to store some values from our FactoryTalk Application using Datalog to a MariaDB. I see there is quite a bit of documentation...
Replies
1
Views
97
drbitboy
drbitboy
D
Connecting to a PLC through VM Ware
I haven't encountered problems connecting to a PLC through VM Ware but I am with this particular machine. I'm running Windows 7 on a Windows 10...
Replies
8
Views
230
arpus4KM
A
M
Connecting Different controllers (brands) with same I/O devices - Demo Station Design
Hi, I want to build a demo station to test devices and programs and I need some help with it. I want to connect GuardLogix, Piltzmulti and...
Replies
1
Views
149
JeffKiper
JeffKiper
Back
Top Bottom