Connecting S5-135u to WinCC V7

recycled_mind

Member
R
Join Date
May 2007
Location
Cebu, Philippines
Posts
118
I am upgrading an old version wincc to V7.
I want to use AS511 communication.
Can I communicate 2 S5-135u cpu's to my WINCC SCADA runtime using Simatic S5 programmers port AS511?

Please give me advise if what is the best connection wherein i don't need to reprogram the AS.

Thanks,
Alex
 

Similar Topics

O
Connecting S5-135U to a TP270
Hello, This is a great forum i hope somebody can help me? I want to connect a touchpanel (TP270) to a Step5 (S5-135U)PLC but i want to know how...
Replies
4
Views
1,722
Opsys
O
T
PLC Delta DVP 12SE and HMI Kinco GL043E not propperly connecting
Good Day to all of you, this is my first post, i will try to explain as best as possible, english is not my natural language. I am performing an...
Replies
0
Views
42
Tecnolaundry
T
J
Connecting a Micrologix 1500 to a PanelView Plus 7
I have been working on this for a while now and I can't seem to get it. I was finally able to view the 1500 on the PanelView under the serial...
Replies
1
Views
87
jscampbell210
J
K
Connecting FactoryTalk Datalog to MariaDB
Hello, I was looking to store some values from our FactoryTalk Application using Datalog to a MariaDB. I see there is quite a bit of documentation...
Replies
1
Views
100
drbitboy
drbitboy
D
Connecting to a PLC through VM Ware
I haven't encountered problems connecting to a PLC through VM Ware but I am with this particular machine. I'm running Windows 7 on a Windows 10...
Replies
8
Views
234
arpus4KM
A
Back
Top Bottom