Hi
has anyone had any luck connecting to a 9030 series PLC using a USB-Serial adapter?
I'm currently trying to use a Startech ICUSB232v2, with a prolific_PL2303 driver, to no avail.
I've set the comm port on the 9030 project to match the USB adapter port setting, but still cant connect.
The error comes up as unable to open comms port and then eventually times out.
What am I doing wrong?
has anyone had any luck connecting to a 9030 series PLC using a USB-Serial adapter?
I'm currently trying to use a Startech ICUSB232v2, with a prolific_PL2303 driver, to no avail.
I've set the comm port on the 9030 project to match the USB adapter port setting, but still cant connect.
The error comes up as unable to open comms port and then eventually times out.
What am I doing wrong?