Connecting to Baxter

Jstandby

Member
J
Join Date
Aug 2014
Location
ohio
Posts
1
Purchased a ML 1400B-The question I have is; am I able to connect another computer directly into the Ethernet port and communicate with the computer that is using TCP/IP protocol?
 

Similar Topics

H
RSLinx Bridge Configuration? Connecting through another PLC
I have 2 PLCs. One is networked to our plant, and the other is networked to the first PLC via a 1756-EN2T. I could easily get the second PLC...
Replies
3
Views
65
dmroeder
dmroeder
T
PLC Delta DVP 12SE and HMI Kinco GL043E not propperly connecting
Good Day to all of you, this is my first post, i will try to explain as best as possible, english is not my natural language. I am performing an...
Replies
0
Views
71
Tecnolaundry
T
J
Connecting a Micrologix 1500 to a PanelView Plus 7
I have been working on this for a while now and I can't seem to get it. I was finally able to view the 1500 on the PanelView under the serial...
Replies
1
Views
119
jscampbell210
J
K
Connecting FactoryTalk Datalog to MariaDB
Hello, I was looking to store some values from our FactoryTalk Application using Datalog to a MariaDB. I see there is quite a bit of documentation...
Replies
1
Views
126
drbitboy
drbitboy
D
Connecting to a PLC through VM Ware
I haven't encountered problems connecting to a PLC through VM Ware but I am with this particular machine. I'm running Windows 7 on a Windows 10...
Replies
8
Views
255
arpus4KM
A
Back
Top Bottom