connection console omron pro27

indra

Member
I
Join Date
Apr 2005
Location
indonesia
Posts
161
I have console OMRON type PRO27 but I lost the cable. Does anyone knows the connection drawing of this cable ? Can I order this cable only ?

Regards,

INDRA
 
The PRO27 has a special connector. You can purchase a cable for that unit. Cable number will depend on what you want to connect to. Let us know the plc you want to hook up to and we can give you the cable number.
 
Hi, IO,

Do you have the wiring connection of this cable ? because I want to try to make by myself because I have the connector.

Thank's

INDRA
 

Similar Topics

S
PLC & console connection diagram
I want to connect PLC MODEL NO:CP1l with console model no:PR001.please help me out how to connect and also state plc cable connection.i will be...
Replies
1
Views
1,662
gclshortt
gclshortt
S
Rockwell PLC Looses Connection Evrytime I reboot..
I have got an Rockwell PLC 1769-L36ERMS . I have assigned a IP address to it . But every-time I Reboot the PLC it looses Communication to my PC...
Replies
1
Views
68
Ken Roach
Ken Roach
S
TIA-portal - Adding connection to HMI in a different project
Hello all! So I have one project with a S7-1214 and a MTP1500 "Project1" and one project with another S7-1214 "Project2". Both of these PLC:s need...
Replies
6
Views
89
swedeleaner
S
A
Omron cj1m ETN cpu11 connection with NT631C
Hi dear . I have a system with cj1m cpu11 etn. previously NT 5z HMI was connected with plc. recently my old HMI got damaged. I want to replace it...
Replies
12
Views
279
IO_Rack
IO_Rack
S
Modbus TCP connection between my plc and a power meter on TIA Portal
Hello gentlemen, Im working on a small project on TIA Portal, about establishing a Modbus TCP connection between my ET200SP plc and a socomec...
Replies
12
Views
333
joseph_e2
J
Back
Top Bottom