i HAVE COME ACROSS THE OMRON HMI NP SERIES NPMQ0001.HOW I CAN CONNECT A THERMAL PRINTER TO NP SERIES HMI USING RS232 AND TEMP.CONTROLLER TO NP SERIES USING RS485/422.CONNECTION CONFIG DETAILS ARE REQ. AND ALSO HW I CAN GIVE PRINT COMMAND FROM HMI ...HW I CAN LINK THESE TO??
connection of thermal printer and temperature controller to NP designer Omron HMI
- Thread starter sreejit
- Start date
Similar Topics
I have got an Rockwell PLC 1769-L36ERMS . I have assigned a IP address to it . But every-time I Reboot the PLC it looses Communication to my PC...
Hello all!
So I have one project with a S7-1214 and a MTP1500 "Project1" and one project with another S7-1214 "Project2".
Both of these PLC:s need...
Hi dear . I have a system with cj1m cpu11 etn. previously NT 5z HMI was connected with plc. recently my old HMI got damaged. I want to replace it...
Hello gentlemen,
Im working on a small project on TIA Portal, about establishing a Modbus TCP connection between my ET200SP plc and a socomec...
Hi all,
My ethernet port on my laptop recently broke and I was hoping to just use a usb-c dongle in the mean time to go live on my PLC until I...
