Good Morning ,
I appreciate your help on a previous post.Your advice helped
me understand more.
My next question involves the same project using a CompactLogix L33
I have 2 conveyors with different speeds.One conveyor 98 fpm
and the other 30 fpm. I'm using a timer of " roughly" 100 ms , to shift the result of the vision system on the one conveyor in the BSL. 100 ms , DN , Shift then 100 ms , DN , shift , etc.
When I get to the other conveyor running 30 foot per minute ,
I need to have another timer, slower than the first one , let's say 300 ms , to index another BSL to keep track of those failures. I still need my first BSL so I can keep track of the
new results coming on the first conveyor.
What I'm trying to say is everything is working well but I need to take the final bit from the BSL for conveyor 1 , and use a MOV to move this 1 or 0 into the first bit of the new BSL . For example ....
MOV Instruction
Vision Result Conv. 1 [3].31
Vision Result Conv. 2 [0].0
When I verify I keep getting. Invalid data type. Argument must match parameter data type
Any thoughts why I can't do this MOV ? It seems fairly straight forward. I know I'm missing something .
Thanks so much in advance .
I appreciate your help on a previous post.Your advice helped
me understand more.
My next question involves the same project using a CompactLogix L33
I have 2 conveyors with different speeds.One conveyor 98 fpm
and the other 30 fpm. I'm using a timer of " roughly" 100 ms , to shift the result of the vision system on the one conveyor in the BSL. 100 ms , DN , Shift then 100 ms , DN , shift , etc.
When I get to the other conveyor running 30 foot per minute ,
I need to have another timer, slower than the first one , let's say 300 ms , to index another BSL to keep track of those failures. I still need my first BSL so I can keep track of the
new results coming on the first conveyor.
What I'm trying to say is everything is working well but I need to take the final bit from the BSL for conveyor 1 , and use a MOV to move this 1 or 0 into the first bit of the new BSL . For example ....
MOV Instruction
Vision Result Conv. 1 [3].31
Vision Result Conv. 2 [0].0
When I verify I keep getting. Invalid data type. Argument must match parameter data type
Any thoughts why I can't do this MOV ? It seems fairly straight forward. I know I'm missing something .
Thanks so much in advance .