I have a control logix PLC that is controlling a few power flex 70's via a 20-comm e module(ethernet/IP). I need to migrate the VFD's to a separate 1756-ENBT module and change the IP addresses of the power flex 20-comm e modules
Is it possible to change the IP address of the 20-comm-e module in the IO configuration tree of RSLogix 5000 while online without halting the PLC processor. I am guessing yes but its been a while and I cannot remember.
My plan is to modify the IP of the drive using the HIM then modify just the IP address in the IO configuration tree while online.
Is it possible to change the IP address of the 20-comm-e module in the IO configuration tree of RSLogix 5000 while online without halting the PLC processor. I am guessing yes but its been a while and I cannot remember.
My plan is to modify the IP of the drive using the HIM then modify just the IP address in the IO configuration tree while online.