COntrol Net Problem

ggchavhan

Member
G
Join Date
Nov 2006
Location
pune
Posts
135
Hi Every Body

I am learning RsLogix5000, during RsNetworks configuration I couldnot upload and download the configuration message is that I do not have active keeper and I donot have it. Please guide me in this regard.

http://www.plctalk.net/qanda/uploads/prg1.JPG
http://www.plctalk.net/qanda/uploads/CNet1.JPG

prg1.JPG



CNet1.JPG
 

Similar Topics

C
Starter ethernet connection problem siemens S120 control unit
Hello, I have connected ethernet cable with my laptop and the s120 control unit. setup my laptop ip 169.254.11.1 and subnet mast 255.255.0.0 ...
2
Replies
20
Views
5,638
chandrapaul
C
R
Control Logix to PV Plus Ethernet comms problem
Please help. I'm upgrading a SLC 5/04 communicating with a standard PanelView to a ControlLogix communicating with a PanelView Plus 6. So far...
Replies
2
Views
3,733
Rick Campbell
R
C
Control Net Problem
I am having an issue with control net connection to a powerflex 700VC. My drive icon in RSLOGIX 5000 interminitly shows the yellow exclamation...
Replies
3
Views
3,583
Chado613
C
D
AB control net communication problem
I am using controlnet to communicate between a flexlogix processor and panelview 600. The push buttons on the screen are passing correctly but the...
Replies
2
Views
2,687
ddwilson1
D
I
Controlnet Problem (Control Logix)
If anyone has ever used controlnet....it can be a ain the a$$. Anyways...i'm having a problem....here's the deal: Have redudant processors...
Replies
8
Views
6,529
Sheldn
S
Back
Top Bottom