pauly
Member
We are looking to use an event driven task to count meters of material on a machine from a proximity switch. Every pulse of the switch initiates the event driven task which will add a value of meters to itself. The maximum frequency of the pulses will be around 70hz so the event will (hopefully) trigger every 14 milli-seconds. My question is will this have a detrimental effect on the rest of the scan for the other code? Also has any one else done a similar thing without using a counter card?
The processor is an L72S. I am debating the use of a dedicated 1756-HSC counter card for the application
The processor is an L72S. I am debating the use of a dedicated 1756-HSC counter card for the application