I have a WinCC V4.0 with a CP1413 card who is communicating with a CP143 (S5) over Sinec-H1.
This PC will be replaced. The new PC will be equipped with a CP1613 and WinCC V6.0 SP2 will be installed. The PLC program and the parameterisation of the CP143 may not be changed
The configuration is done, but there is no data exhange.
Probably it is the configuration of the CP1613. Some people tell me it is not possible to make a connection between CP1613 and CP143.
Is this true? Has somebody experience with this.
Thanks.
This PC will be replaced. The new PC will be equipped with a CP1613 and WinCC V6.0 SP2 will be installed. The PLC program and the parameterisation of the CP143 may not be changed
The configuration is done, but there is no data exhange.
Probably it is the configuration of the CP1613. Some people tell me it is not possible to make a connection between CP1613 and CP143.
Is this true? Has somebody experience with this.
Thanks.