CPU 319F-3 PN/DP, UDP communication

Filip

Member
F
Join Date
Feb 2010
Location
Gliwice
Posts
10
Hello,
I wanna ask that somebody knows that this CPU can communicate by UDP with superior system without CP card? I have Profinet as industrial network.

Greetings,
 

Similar Topics

M
Siemens CPU 319F-3 PN/DP
I have two project sites that have several CPU-319F-3 PN/DP PLC's installed on various material handling systems. In the last two months I have...
Replies
3
Views
2,261
MHennel
M
A
S7 CPU 319F-3 question
We are using S7 CPU 319F-3. When i tried to open some block it is giving following message: The block can only be read because the software...
Replies
2
Views
4,016
adfox
adfox
A
S7 cpu 319f-3 pn/dp
We are using CPU319F-3 PN/DP cpu of Simatic S7. Whenever we try to open the hardware of the project we can not open FDO 8 x DC 24V/2A, order not...
Replies
1
Views
3,990
JRW
JRW
H
Siemens CPU 317-2DP Firmware Version V2.1.8
Hello, I have a CPU 317-2DP Firmware Version V2.1.8. In TIA Portal only V2.6 is available, and there is no option to upgrade FW. Then I open it...
Replies
0
Views
13
hafizzz_ahmad
H
Z
PLC CPU Unit Upgrade
Hello all, I have a one problem. I would like to upgrade Mitsubishi PLC Q02 to Q03UDVCPU. I have Q02 program and I change to PLC type and try to...
Replies
7
Views
167
parky
P
Back
Top Bottom