I am working on a conversion project, upgrading some old CTCs to Panelview 1000s, and have run into several buttons with addresses I don't know anything about.
Most of the tag addresses in the old CTC software were in the format ABEN\1$N10:1.1. These are converted to ::[PLC1]N10:1.1 for factory talk.
In the second leg of this project, I have run into a small amount of tags in the following format: DVR\2:640
What are these tags used for in the old Interact 6.0 software? How are they converted to Factorytalk for a Panelview? Any help would be greatly appreciated. Please let me know if you need any additional information.
Most of the tag addresses in the old CTC software were in the format ABEN\1$N10:1.1. These are converted to ::[PLC1]N10:1.1 for factory talk.
In the second leg of this project, I have run into a small amount of tags in the following format: DVR\2:640
What are these tags used for in the old Interact 6.0 software? How are they converted to Factorytalk for a Panelview? Any help would be greatly appreciated. Please let me know if you need any additional information.