Data exchang Deltav(Master)<---->CPU315-2DP(Slave)

abed_rezvani

Member
A
Join Date
May 2015
Location
bojnurd
Posts
1
Hello
Can any body help me for communicating Deltav and PLC(Cpu 315-2DP)without cp342.
How am I doing this configuration in PLC.
Please help me.o_O
 

Similar Topics

L
libnodave exchang data with siemens s7?
I have installed libnodave-0.8.1 on RedHat 8 platform,beacuse I want to exchange data with siemens S7 300/400 PLCs. I have writen the program: int...
Replies
0
Views
5,275
lijasmine
L
A
WinCC C-script Raw data operation.
Hello. I have a db which is 1000 INT, and this db is represented in WinCC as a raw data type set of 5x 400 Bytes. This set is read with a script...
Replies
1
Views
61
AdamF
A
K
Need Help Modifying Citect Scada Historical Trend Variable Data
So i've been at this for a long while, i have Citect Scada 2018, i have full access to everything but i can't seem to find any option or...
Replies
0
Views
54
kreamsippycup
K
A
reading data from siemens controller (profinet) to ethernet/IP controller
Hello I have a s7-1200 and I would like to read the tags present in this controller with my controllogix controller. The two controllers don't use...
Replies
5
Views
164
bkottaras
B
P
WinCC RT Advanced - Data Logging Memory
Hi folks, I'm not as accustom with Siemens & WinCC, however I've been asked to increase the amount of data an existing application is logging...
Replies
2
Views
75
Plantationpark
P
Back
Top Bottom