sjknight
Member
We are looking for a device that can take a 4-20 ma
signal and convert it to a 0-208 v output signal
signal and convert it to a 0-208 v output signal
Device Needed !!!
- Thread starter sjknight
- Start date
panic mode
Member
are you trying to control 3phase motor speed with 4..20mA plc signal?
randylud
Member
http://www.payneng.com/ take a look here, might be something you can use!
Similar Topics
Ok so here's the poll...
We need a standalone device that can send an email or SMS message on an external contact closure. It will connect to...
My sister recently bought an old abandoned home to start a haunted house in. Shes always worked in this field and the last few years worked full...
I have this problem and I'm hoping somebody has an idea of what I can do.
Here is the situation. I have a control panel that has 13 VFD' (160...
Anyone have a idea of what would cause a failure of all nodes (buckets) of an AB Device Net MCC upon a power cycle of the main feeder for that MCC?
Hi,
I'm trying to use the IO Device Library (Product Versions) which is configured to work with the 1756-EN4TR & 1756-EN2TR but my system uses...