MarvelJoe872
Member
Hi there,
I have above mentioned VFD which is communicating to my control logix(L62) plc using devicenet DNB scanner(plc side) and 20-comm-D card on VFD side. I have Commands going out and statuses being read to/from PLC. Unfortunately over deviceNet I have limited status i can receive. My client needs to get the amperage feedback in the HMI. Which is not supported by my VFD over devicenet. I am trying to figure out a way just like I can access all VFD parameters from Rsnetworx software if there is a way to somehow(indirect way) get the live amperage feedback from VFD.
Thanks for you time and help.
1. These statuses i can get over devicenet which does not include amps
2. I am looking to get this parameter(ID-3) which is accessible through Rsnetworx:
I have above mentioned VFD which is communicating to my control logix(L62) plc using devicenet DNB scanner(plc side) and 20-comm-D card on VFD side. I have Commands going out and statuses being read to/from PLC. Unfortunately over deviceNet I have limited status i can receive. My client needs to get the amperage feedback in the HMI. Which is not supported by my VFD over devicenet. I am trying to figure out a way just like I can access all VFD parameters from Rsnetworx software if there is a way to somehow(indirect way) get the live amperage feedback from VFD.
Thanks for you time and help.
1. These statuses i can get over devicenet which does not include amps
2. I am looking to get this parameter(ID-3) which is accessible through Rsnetworx: