Digital Input cable fir PLC/DCS

rthiyagu_00

Member
R
Join Date
Nov 2006
Location
TRICHY 620013
Posts
26
We are Boiler manufacturer. The boiler are used in steel and other process industries. All our boilers are controlled by PLC with SCADA or by DCS. Normal interrogation voltage for Digital input is 24V DC. What type of cable is to be provided for Digital inputs from field to PLC/DCS (i.e) whether Screened/Shielded pair or multicore control cable. Forum can suggest with pros and cons.
Regards.
R.Thiyagarajan.
 

Similar Topics

A
Siemens SM321 Digital input maximum cable length?
Hello guys, I have an issue about maximum cable length calculation of a digital input on Siemens SM321 card. by calculation and according to...
Replies
8
Views
2,938
azetou
A
tlf30
Dirt cheap digital indicator + operator input
Hello, I'm looking for a dirt cheap digital display + input, that would be wired to an analog input and analog output. This would be for my home...
Replies
10
Views
255
jaden
J
P
Digital numeric input device with ethernet
I have an application that needs a simple way for an operator to input an integer value and send it to a PLC. An HMI is overkill, but I am...
Replies
11
Views
1,284
drbitboy
drbitboy
T
Is anyone familiar with AD SureServo PCS digital input position commands?
I am experimenting with a very simple program for testing purposes and not getting any movement from the servo motor. The attached program...
Replies
6
Views
1,799
ThreatLevelMidnight
T
C
Using Input Digital Inputs to clear Kinetix 300 faults
So I am new to the plc scene, and I am working on a machine that gets a fault, to which I think it is a overtorque fault. I did some research on...
Replies
7
Views
1,991
Caleb_newprog
C
Back
Top Bottom