Hello Experts,
I have Siemens 315-2PN/DP and drive from third party. Drive is sitting on Profinet network and it is working fine. Now the customer wants to show me a signal for communication loss on HMI.
There is one register in drive which keeps updating (by the drive) and resets to zero after overflow. My concern is to monitor this register and if it didn't update in 2 seconds then I have to raise the loss of communication bit. Can somebody suggest me the simplest way of doing this.
Any help in this matter will be highly appreciated.
Regards
Manoj
I have Siemens 315-2PN/DP and drive from third party. Drive is sitting on Profinet network and it is working fine. Now the customer wants to show me a signal for communication loss on HMI.
There is one register in drive which keeps updating (by the drive) and resets to zero after overflow. My concern is to monitor this register and if it didn't update in 2 seconds then I have to raise the loss of communication bit. Can somebody suggest me the simplest way of doing this.
Any help in this matter will be highly appreciated.
Regards
Manoj