Need help communicating PC to Dtam PLus. I am using a 1756-CP3 cable on a windows 98 PC. Downloaded the DPS Software for the Dtam but can not establish communication. I have it set for RS-485, 19200 baud rate, data bits 8, parity even. Not sure what stop bit and flow control neen to be set on.
Dtam plus
- Thread starter phan8314
- Start date
James Mcquade
Member
phan8314,
gogle dtam plus and download the manuals.
the pdf's has the cables and instructions.
the cable you stated is not the one they recommend.
had a quick break to answer.
regards,
james
gogle dtam plus and download the manuals.
the pdf's has the cables and instructions.
the cable you stated is not the one they recommend.
had a quick break to answer.
regards,
james
Similar Topics
Need Help
I am looking for software for Allen Bradley Dtam Plus . I think it is 2707 NP.
thanks
We are upgrading a number of our PLCs and DTAM Plus panels. Is it possible to upload the DTAM configurations and drop them into the Panel View...
Help Guys
When can I get the software for a 2707-v40p2
Thanks
Jim Cav
Hello,
I am needing to upload the program from a 1747-DTAM plus (serial# DTAM-0695A1916) to my pc.. Currently the DTAM communicates with the...
Has anybody out there worked with DTAM PLUS.
It is connected with SLC5/03 thru DH485 to DTAM PLUS. What do I need to verify if it is communicating...