We are converting over to vb.net from vb. The plc is an AB SLC503. Previous code was using the dtl32.dll and dtl_c_define, dtl_read_w, etc. with buffers for getting the data from the plc. Are there any examples of changing the code to use opcnet.api from using the dtl32.dll? Any help would be greatly appreciated. Thanks
dtl32 and vb.net
- Thread starter mshaw
- Start date
Similar Topics
We want to control with C# the RSLinx DTL32.dll.
I have problems with the DTL_READ_W and DTL_READ_W functions of the RSlinx software...
Hi,
Is it possible to read thru DTL32.DLL by name as micrologic5000
Instead of "$N17:0,70,FLOAT,READ,AB:LOCAL,3 ,SLC500,1"
To send "...
Hi, I am working with dtl32.dll, is it possible to read data by Variables Names
I am working with Visual Basic 6, will be happy to get VB6...
Hello guys i'm working with an s7 1200 plc with an ET 200S expansion module. The problem is that i can't find the plc when searching in the...
Good morning everyone I’m currently working on a omron device net and have a nord drive that fell off the network. I have limit knowledge in...